E U R O
3
-
D R AW E R S T O R A G E T R O L L E Y A S S E M B LY
E U R O Q U A R T E R
-
R O U N D A S S E M B LY
1
2 3 pcs
A 6 pcs
1
3 pcs
B 6 pcs
C 6 pcs
D 3 pcs
Parts list
Unpack and lay the parts on a clean, flat surface. Check that you have all
the parts shown in the diagram below.
1
Building the desk
Set the table top (1) upside
down. Attach the legs (2) by
sliding a long bolt (C) through a
locking washer (B) and then a
regular washer (A). Insert the
bolt through the inside of the
table top into the leg and tighten.
Repeat for each of the legs.
Insert leg levelers (D) into each
leg. Adjust each until the desk
sits at a level position.
2
B
D
E
C
Parts list
Unpack and lay the parts on a clean, flat surface. Check that you have all the
parts shown in the diagram below.
1
Attach the casters
While holding the drawers in place flip the trolley upside down on a clean
work surface, a piece of the Styrofoam packaging is perfect for this. Line up
each caster (B) and attach using 4 screws (D) per wheel.
Next, open the bottom drawer and align the front wheel (C) with the holes
provided and attach using 5 screws (E).
2
A 1 pc
B 4 pcs
C 1 pc
G 2 pcs
F 2 pcs
E 5 pcs
D 16 pcs
