Figure 2: WPS-0104 LevelOne Wireless Printer Server Screen
3. Click
Next
on the first screen of the Wizard, to view a list of WPS-0104 LevelOne
Wireless Printer Servers on your LAN.
4. Select your new WPS-0104 LevelOne Wireless Printer Server, then click
Next
to continue.
5. Enter the required data on the following screen.
•
Name of the Print Server can be changed if you wish.
•
Comment is optional.
•
Select or enter the Workgroup name for this WPS-0104 LevelOne Wireless Printer
Server.
6. Click
Next
to configure the
TCP/IP Screen
:
•
Select
Obtain IP Address automatically
if your LAN has a DHCP Server, otherwise
select
Fixed IP Address
.
•
For
Fixed IP Address
, enter an unused address from the range used on your LAN, or
click the
Suggest New Values
Button.
Use the same
Network Mask
and
Gateway
as PCs on your LAN.
7. On
the
Wireless Screens
, the settings should be set to match your other Wireless Stations.
For details about each setting, refer to the following section
Wireless Configuration
.
8. Click
Finish
to save the data to the WPS-0104 LevelOne Wireless Printer Server.
Note: To install the Wizard on your PC, use the "Installation" option.
If the desired WPS-0104 LevelOne Wireless Printer Server is not listed:
•
Check all cables to the WPS-0104 LevelOne Wireless Printer Server.
•
Check that the WPS-0104 LevelOne Wireless Printer Server's Error LED is Off. If it is
On, restart the Print Server.
•
Check that your PC and the WPS-0104 LevelOne Wireless Printer Server are on the same
LAN segment. (If you don't have a Router or Gateway on your LAN, you only have 1
segment.)
•
Check that your PC has either the TCP/IP or NetBEUI network protocols installed. See
Checking your Network Protocols
in Chapter 4for details.
Page 8