Page 47
IPP Client Setup - Windows 2000
Windows 2000 has its own IPP Client, and there is no need to install the supplied IPP Client
Software. To use Windows 2000's IPP Client with the LevelOne Printer Server, follow this
procedure:
1. Start the
Add Printer
wizard.
2. Select
Network Printer
, and click "Next" to see the
Locate your Printer
screen, as shown
below.
Figure 20: Windows 2000 - Locate your Printer
3. Select
Connect to a printer on the Internet or on your Intranet
, and enter the URL of the
IPP Server as follows, where
ip_address
represents the IP Address of the IPP Server,
and 631 is the port number.
Parallel Port 1
ip_address:631/ipp/P1
Parallel Port 2 (if exists)
ip_address:631/ipp/P2
Parallel Port 3 (if exists)
ip_address:631/ipp/P3
These entries are case sensitive. They must be
entered as shown, with "ipp" in lower case, and
P1, P2 and P3 in UPPER case.
4. If the connection can be established, and the printer on that p ort is on-line, the following
dialog will be displayed.