-36-
When it is switched to AP mode, the wireless adapter will automatically set
its IP address as 192.168.123.1, and other clients that connected to this AP
will automatically obtain the IP addresses of: 192.168.123.X (X is any integer
from 2 to 254).The function buttons on the top (From L to R )are respectively
Config AP, Advanced, Access Control List, Associate List, About, and MiniSize,
while the left column displays Turn On/Off RF, Security /No security, and AP
mode icon.
4.2.1 Config AP
This screen is used to set the AP’s general parameters including SSID, wireless
mode, channel, authentication type and encryption type, as shown in the
picture below.
Here the authentication type is set as “Open” and the encryption type “Not
Use”.
