3
Easy configure AP2 via
WEC.
Master to Slave WEC:
1. Trigger AP1 into WEC configuration process via
pressing the WEC button for 3 second.
2. Trigger AP2 into WEC configuration process via
pressing the WEC button for 3 second.
3. It takes 30 ~ 60 seconds for the device to finish
the WEC configuration process.
(P.S:VAP1 of 2.4GHz or 5GHz in Salve Mode
will get WiFi profile from Master AP1.)
4
Easy configure AP3 via
WEC.
Slave to Slave WEC:
1. Trigger AP2 into WEC configuration process via
pressing the WEC button for 3 second.
2. Trigger AP3 into WEC configuration process via
pressing the WEC button for 3 second.
3. It takes 30 ~ 60 seconds for the device to finish
the WEC configuration process.
(P.S:VAP1 of 2.4GHz or 5GHz in Salve Mode
will get WiFi profile from Master AP1.)
5
Easy configure AP4 via
WEC.
Slave to Slave WEC:
1. Trigger AP3 into WEC configuration process via
pressing the WEC button for 3 second.
2. Trigger AP4 into WEC configuration process via
pressing the WEC button for 3 second.
3. It takes 30 ~ 60 seconds for the device to finish
the WEC configuration process.
(P.S:VAP1 of 2.4GHz or 5GHz in Salve Mode
will get WiFi profile from Master AP1.)
6
Mount the devices AP1,
AP2, AP3, and AP4 to
expected locations.
1. Install AP1 to its location first and verify its
wireless network connectivity with a client
device.
2. Install AP2 to its location and verify its wireless
network connectivity with a client device at the
location beyond the service range of AP1.
Besides, You can also check the AP2’s WiFi
LED, it should be “Solid Amber” if AP2 already
connected a Master AP AP1.
3. Install AP3 to its location and verify its wireless
network connectivity with a client device at the
location beyond the service range of AP2.
Besides, You can also check the AP3’s WiFi
