Product Diagram
English
Hardware Installation
Step 1: Connection to Power over Ethernet Switch
A. Connect one of the Ethernet Switch port with PoE power supply to the
PoE IN
port of
POR-0120/0122 as the following connection.
B. The LED indicators “
POWER”
and “
PoE IN”
will turn on indicating the PoE and Ethernet
connection.
C. The LED indicators “
PoE IN
” will flash to indicate Ethernet data activity.
Step 2: Connection to PoE PD
D. Connect the“
PoE OUT”
port of POR-0120/0122 to power up the PD device as the following
connection.
E. The LED indicators “
PoE OUT”
will turn on indicating the PoE and Ethernet connection.
F. The LED indicators “
PoE OUT
” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the POR-0120/0122 may be working for
shorter length than 100 meter.
