LevelOne PLI-3211, Руководство пользователя

Страница: 7 / 29

5
This button is used to clear ALL data and restore ALL settings to the factory default
values.
Note: The HomePlug AV Ethernet Bridge must be plugged in to restore it to factory
defaults. Using a small object like a paper clip, depress and hold the Reset button until
the status lights begin to flash. The Reset button will need to be depressed for about
2 to 3 seconds for the reset to occur.
LED Indicators
The Powerline Ethernet Adaptor has three LEDs indicator:
PWR Turn on when connected to AC power supply.
PL
Turn on when detected and connected with another HomePlug adaptor
within the network.
1~4
Turn on when connected to the Ethernet card of the computer or
Ethernet Hub / Switch.
1.4 Package Contents
Make sure that you have the following items:
- PLI-3211
- RJ-45 Ethernet LAN cable
- Quick Installation Guide
- CD User Manual / QIG/Utility
1.5 System Requirements
- Powerline Ethernet Adaptor can support any Operation System. But the Powerline Utility can
only support Windows 2000/XP/Vista/Windows 7.
- Pentium III 300 MHz or above
- Powerline device
- AC power outlet