LevelOne GSW-2493 Скачать руководство пользователя страница 90

Страница: 90 / 114

5. If the groups’ list is over one page, you can click

to view other VLAN

groups.

6. Use

Delete

button to delete unwanted VLAN.

7. Use

Edit

button to modify existing VLAN group.

802.1Q VLAN

Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is

possible to create a VLAN across devices from different switch venders. IEEE 802.1Q

VLAN uses a technique to insert a “tag” into the Ethernet frames. Tag contains a VLAN

Identifier (VID) that indicates the VLAN numbers.

You can create Tag-based VLAN, and enable or disable GVRP protocol. There are

256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the

switch belong to default VLAN, VID is 1. The default VLAN can’t be deleting.

GVRP allows automatic VLAN configuration between the switch and nodes. If the

switch is connected to a device with GVRP enabled, you can send a GVRP request

using the VID of a VLAN defined on the switch; the switch will automatically add that

device to the existing VLAN.

Содержание GSW-2493



















































































































Результаты поиска

Содержание GSW-2493

Отзывы:

LevelOne GSW-2493, Руководство пользователя, Страница: 90 / 114

Результаты поиска

Содержание GSW-2493

Отзывы: