LevelOne GEP-2652, Быстрое руководство по установке, Страница: 6 / 27

- 4 -
3. Perform Initial Configuration
1.Connect a PC to the switch console port using the included console cable.
2.Configure the PC’s serial port: 115200 bps, 8 characters, no parity, one stop bit, 8 data bits, and no flow
control.
3.Log in to the CLI using default settings: Username “admin” and password “admin.”
4. Logging on to the equipment
1. Connect the RJ-45 interface cable of a switch with a computer using a network cable.
2. Set the TCP/IP properties of the computer, see the Appendix: Setting up yourcomputer .
3. Logging on to the equipment: Open a browser and type 192.168.1.1 in the address bar, and then
press Enter; in the pop-up login interface, enter the factory logon username " admin ", password
" admin " and click OK.
Note: For further information on switch configuration, refer
to the Web Management Guide and CLI Reference Guide .