
Chapter 4 Configuration Wizard
http://www.level1.com
Page 12
Chapter 4.
Configuration Wizard
By reading this chapter, you can understand the basic network parameters required for the
device
to access to the Internet, and these parameters are configured to connect the device to the
Internet.
Before configuring "Internet Line" in the Configuration Wizard, you should properly configure the
network settings of the network computer. For specific methods, see Chapter 3 Logging in the
Device.
If this is the first time for you to log in the device, a configuration wizard homepage appears
directly in the main operating page. As shown in Figure 4_1:
Figure 4_1 Home page of configuration wizard
In logging next time, the wizard will no longer automatically pop up: When checking it, you
can go directly to the
System Status
page in logging next time;
Exit the wizard: Exits the Configuration Wizard and returns to the
System Status
page.
Next step: Enter the
Selection of device access mode
page
.
4.1
WAN1 Port Configuration - Dynamic IP access
Configure the second page of the wizard to configure the WAN1 port address of the device. The
default WAN line access takes dynamic IP access, as shown in Figure 4-2. If your Internet access
mode is dynamic IP access, please click <Finish>, to complete the configuration of the Internet
line.
Содержание GBR-4001
Страница 191: ...http www level1 com Page 186...