17
device that is powered on and on-line.
II. 100BASE-TX port Link LED is lit, Collision LED is blinking, but
traffic is irregular.
Ø
Check that the attached device is not set to dedicated
Full-Duplex. (Some devices use a physical or software
switch to change Duplex modes. Auto-Negotiation may
not recognize this type of Full-Duplex setting).
ALWAYS CHECK THAT:
Ø
CABLE AND LINK DISTANCES ARE WITHIN THE NETWORK'S
SPECIFICATIONS
Ø
OVERALL NETWORK DIAMETERS ARE WITHIN THE
NETWORK'S SPECIFICATIONS