LevelOne FSW-1640TX, Руководство пользователя

Страница: 14 / 35

14
You can press “Enter” for viewing the status of the rest of the ports.
LevelOne FSW-2440TX
24-Port Smart Switch
====================
Port 13 14 15 16 17 18 19 20 21 22 23
24
----------------------------------------------------------------------
-------
LINK OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
OFF
En ON ON ON ON ON ON ON ON ON ON ON
ON
An ON ON ON ON ON ON ON ON ON ON ON
ON
Rate --- --- --- --- --- --- --- --- --- --- ---
---
Duplex --- --- --- --- --- --- --- --- --- --- ---
---
Flow ON ON ON ON ON ON ON ON ON ON ON
ON
Mirror OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
OFF
[E]:Rx/Tx Enable/Disable [A]:Auto-Negotiation [R]:Data Rate [D]:Duplex
Mode
[F]:Flow Control [ESC]:Exit [Enter]: Next Page
E: set port Rx/Tx ENABLE/DISABLE, the operating status of the port. Use this
screen to enable or disable the selected port. Press ‘E’ to enable Rx and Tx
or ‘D’ to disable Rx and Tx or press ‘R’ or ’T’ to change Rx/Tx current status. A
disabled port does not transmit any packets to the connected segment, nor
forward any received packets to the switching back-plane.
A: set AN function ENABLE/DISABLE, the Auto Negotiation status for the port.
Use this screen to enable or disable the Auto Negotiation function for the port.
R: set data rate 10/100, the current connection speed specified for the port.
Use this screen to set the speed of a port. Port speed can be either 100Mbps
or 10Mbps. If Auto Negotiation is enable there has no effect on the speed
selection. Force to change data rate if and only if the Auto Negotiation mode
will be disabled.
D: set duplex full/half mode, the current connection speed specified for the
port. Use this screen to set the speed of a port. Port speed can be either
100Mbps or 10Mbps. If Auto Negotiation is enable there has no effect on the