background image

 

 

3

I

N T R O D UC T I O N

 

This chapter describes the features of the Switch and some 

background information about Ethernet/Fast Ethernet 

switching technology. 

Fast Ethernet Technology 

The growing importance of LANs and the increasing 

complexity of desktop computing applications are fueling the 

need for high performance networks. A number of high-speed 
LAN technologies have been proposed to provide greater 

bandwidth and improve client/server response times.  Among 

them, 100BASE-T (Fast Ethernet) provides a non-disruptive, 
smooth evolution from the current 10BASE-T technology.  

The non-disruptive and smooth evolution nature, and the 

dominating potential market base, virtually guarantee cost 
effective and high performance Fast Ethernet solutions in 

the years to come. 
100Mbps Fast Ethernet is a new standard specified by the 
IEEE 802.3 LAN committee.  It is an extension of the 

10Mbps Ethernet standard with the ability to transmit and 

receive data at 100Mbps, while maintaining the CSMA/CD 
Ethernet protocol. Since the 100Mbps Fast Ethernet is 

compatible with all other 10Mbps Ethernet environments, it 

provides a straightforward upgrade and takes advantage of 
the existing investment in hardware, software, and 

personnel training. 

Содержание FSW-1609TFX




























Отзывы: