LevelOne FSW-0802TX, Руководство пользователя

Страница: 34 / 47

Mini Console
3-18
Loop Isolation
Loop Isolation is an important feature of the FSW-0802/1201TX. This
condition could exist if two ports are inadvertently connected to each other
causing a loop.
The switching device can not sustain a loop because it produces Broadcast
Storm thereby jamming the system with looping packets. FSW-0802/1201TX
supports isolating the looped ports. If the function is enabled, the device will
monitor all ports to see if there are any loops.
Once a loop is detected (which takes about one second), it will disable that
port. The port number frame will blink indicating it has been temporarily
isolated. Every 8 minutes, the port will be released to see if it is still looping.
The function of LOOP ISOLATE is disabled at the time it shipped from
manufacturer. You have to enable the function through Mini-Console. The
command sequence is:
UNIT CONFIG > LOOP ISOLATE > ENABLE><Enter and hold>
After the command is entered, it will be saved in the EEPROM.
Sub-Menu Command To Set Press:
Loop Isolation Enable Enter and hold
Disable Enter and hold
Back Enter
Table 3.10 Loop Isolation
Lock the Console
Setting this option to Enable locks the system settings. If there is no
password set, a prompt will request one be entered.
UNIT CONFIG > CONSOLE LOCK> ENABLE><Enter and hold>