Network Camera User’s Manual
41/56
(1) UL
,
UR
,
LL
and
LR
buttons control the camera to an oblique angle. And
Home
button controls the camera to the center.
(2) Pan angle:
This sets the range of the horizontal movement of the camera.
The larger value is setting, the larger movement of
Left
or
Right
is performed
by the camera.
(3) Tilt angle:
This sets the range of the vertical movement of the camera. The
larger value is setting, the larger movement of
Up
or
Down
is performed by the
camera.
(4) Patrol cycle:
It is
the cycle of patrol function.
(5) Auto pan speed:
This defines the speed of auto panning. The larger value
is setting, the faster the camera will move.
(6) Auto patrol speed:
This defines the speed of auto patrol. The larger value
is setting, the faster the camera will move.
Preset point setting
(1) Set the home position
--Set default value as home position:
Restore home position to original
default home by clicking on this button.
--Set the current position as home position:
Click on the button will set
the current aimed position as home of the Network Camera. Each time the
Network Camera reboots or finishes calibration, it will automatically aim to
the defined home position
(2) Set the auto pan range
--Set default value as auto pan range:
Restore auto pan range to original
default auto pan range by clicking on this button.
--Set the auto pan range manually:
Click on the button will set the auto
pan range of the Network Camera.
(3) Add or delete a preset point
--Add current point as a preset point:
If the User wants to save the current
view as a preset location, enter a name to each of the current video view on
Preset points
and click on the
Finish
button. The camera allows for 20
preset locations.
--Delete a preset point from below:
This keeps a list for preset positions.
Clicking on the
Finish
button will remove the current selected position from
the preset list.
Patrol list setting
(1) Preset points:
The preset points box list all preset points. User must use to
drag the preset points to
Patrol list
box.
When the action is recognized, the
Patrol list
box changes to red.
(2) Patrol list:
The Patrol list box list all patrol points. Users use the drag to
adjust of the patrol point (Up or down).
Dwelling time (sec):
The stop time of
each preset location during auto patrols of the Network Camera.
(3) Remove patrol point:
The remove patrol point box will remove the patrol
point.
Содержание FCS-6020
Страница 9: ...FCS 6020 User Manual 9 56...
Страница 14: ...Network Camera User s Manual 14 56...
Страница 15: ...Network Camera User s Manual 15 56...
Страница 16: ...Network Camera User s Manual 16 56...
