4. Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
5. Click
Next
to continue.
6. If
the
Administrator ID
and
Password
have been set, you will be prompted to enter them,
as shown below. Enter the
Administrator ID
and
Password
set on the
User
screen.
Figure 6: Password Dialog
By default, the Administrator ID and password are blank.
However, you should assign a name and password, on the
"User" screen of the Web interface. The Web interface can be
accessed via the "Web UI" button on the final screen of the
Wizard.
7. On the following screen, shown below, choose
Fixed IP
or
Dynamic IP
.
•
Fixed IP
is recommended, and can always be used.
•
Dynamic IP
can only be used if your LAN has a DCHP Server.
Figure 7: Fixed or Dynamic IP Selection
8. Click
Next
to continue.
•
If
Dynamic IP Address
was selected, you will then see the screen shown in
Figure 9:
Camera Settings
.
•
If you selected
Fixed IP Address
, the following screen will be displayed.
8
