LevelOne FBR-1430, Быстрое руководство по установке

Страница: 4 / 46

4. Connect the supplied Power Adapter and power on.
5. Check the LEDs

The Status LED should flash, and then turn off. If it
stays on, there is a hardware error.

The WAN LED should be ON.

For each active LAN (PC) connection, the LAN
Link/Act LED should be ON.

Configuration
1. Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the VPN Broadband
Router’s DHCP Server.
2. Start your WEB browser. In the Address box, enter the
following:
HTTP://192.168.0.1
3. Click WAN Wizard to proceed initial setup
4. Step through the Wizard until finished. Refer to the data
from your ISP, and the table below, as necessary.
Connection Type Data required.
Dynamic IP Ad-
dress Usually, none.
But some ISPs may require a
Hostname , Domain Name , or
MAC (physical) address .
Specified (Fixed)
IP Address IP Address allocated to you,
and related information.
PPPoE Login name and password.
PPTP, L2TP, Big
Pond Login name and password,
Server IP Address
5. On the final screen of the Wizard, run the test and check