LevelOne FBR-1416, Руководство пользователя

Страница: 46 / 85

42
Figure 30: Inbound Services Screen
Data – Incoming Rules Screen
Inbound Services
Service
Select the desired Service. This determines which packets are
covered by this rule. If necessary, you can define a new Service
on the "Services" screen, by defining the protocols and port
numbers used by the Service.
Action
Select the desired action for packets covered by this rule:
•
ALLOW always
•
ALLOW by schedule, otherwise Block
•
BLOCK always
•
BLOCK by schedule, otherwise Allow
Note:
•
Any inbound traffic which is not allowed by rules you create
will be blocked by the Default rule.
•
BLOCK rules are only useful if the traffic is already covered by
an ALLOW rule. (That is, you wish to block a sub-set of traffic
which is currently allowed by another rule.)
•
To define the Schedule used in these selections, use the
"Schedule" screen.
Send to
LAN Server
Select the PC or Server on your LAN which will receive the
inbound traffic covered by this rule.
WAN Users
These settings determine which packets are covered by the rule,
based on their source (WAN) IP address. Select the desired
option:
•
Any - All IP addresses are covered by this rule.
•
Address range - If this option is selected, you must enter the
desired values in the "Single/Start" and "Finish" fields to
determine the address range.
•
Single address - Enter the required address in the
"Single/Start" fields.