LevelOne FBR-1411TX, Руководство пользователя

Страница: 32 / 56

32
4.6.4 MAC Address Control
MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in this page will take
effect only when “Enable” is checked.
Connection control
Check " Connection control " to enable the controlling of which clients can connect to this device. If a
client is denied to connect to this device, it means the client can't access to the Internet either. Choose
"allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control table"
(please see below), to connect to this device. But note that do not configure the router with one case
resulting in none can access it. For example, enable the MAC Address Control and Connection
Control, reject unspecified MAC addresses to connect the router, but there is no entry rule for allowing
some hosts to connect the router. This will result in none can access the router.
MAC Address
MAC address indicates a specific client.
IP Address Expected IP address of the corresponding
client. Keep it empty if you don't care its
IP address.
C When " Connection control " is checked,
check " C " will allow the corresponding
client to connect to this device.
Previous page and Next Page
To make this setup page simple and clear, we have divided the “Control table” into several pages. You
can use these buttons to navigate to different pages.