LevelOne FBR-1407, Руководство пользователя, Страница: 8 / 92

8
2.1.2. Rear Panel
Figure 2-2 Rear Panel
Ports:
Port Description
5VDC Power inlet: DC 5V, 2A (minimum)
WAN
The port where you will connect your phone jack.
Port 1-4 The ports where you will connect networked computers and other
devices.
PRINTER Printer Port
RESET
To reset system settings to factory defaults, please follow the steps:
1. Power off the device,
2. Press the reset button and hold,
3. Power on the device,
4. Keep the button pressed and watch the M1 LED, when they flash 8
times then release the reset button.
2.2 Procedure for Hardware Installation
LevelOne FBR-1407 can be positioned at any convenient place in your office or house. No special
wiring or cooling requirements is needed. However, you should comply with the following guidelines
to install:
"
Place this product on a flat horizontal plane.
"
Keep this product away from any heating devices.
"
Do not place this product in dusty or wet environment.
In addition, remember to turn off the power, remove the power cord from the outlet, and keep your
hands dry when you try to install the hardware of this product.