LevelOne FBR-1161, Руководство пользователя

Страница: 46 / 60

43
IP Filter Rule Editing
IP Filter Rule Index : This is item number
Active : Select Yes from the drop down list box to enable IP filter rule.
Source IP Address : The source IP address or range of packets to be monitored.
Subnet Mask : It is the destination IP addresses based on above destination
subnet IP
Port Number : This Port or Port Ranges defines the port allowed to be used by
the Remote/WAN to connect to the application. Default is set from range 0 ~
65535. It is recommended that this option be configured by an advanced user.
Destination IP Address : This is the destination subnet IP address.
Subnet Mask : It is the destination IP addresses based on above destination
subnet IP
Port Number : This is the Port or Port Ranges that defines the application.
Protocol : It is the packet protocol type used by the application, select either TCP or
UDP or ICMP
Rule Unmatched : Select action for the traffic unmatching current rule; Forward to
leave it pass through, and NEXT to check it by the next rule.
IP Filter Listing
# : Item number.
Active : Whether the connection is currently active.
Src IP Mask : The source IP address or range of packets to be monitored.
Dest IP Mask : This is the destination subnet IP address.
Src port : This Port or Port Ranges defines the port allowed to be used by the
Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is
recommended that this option be configured by an advanced user.
Dest Port : This is the Port or Port Ranges that defines the application.
Protocol : It is the packet protocol type used by the application, select either TCP or
UDP or ICMP
IP Filter Listing: Listing all IP Filter you
’ve created.