LevelOne CamCon WCS-0020, Руководство пользователя

Страница: 45 / 87

39
Fixed Video
Quality Select the desired fix quality. The default fix quality is set to
Normal.
Max. Frame Rate Select the desired Maximum bandwidth for the video stream.
Note that you can specify EITHER the Bandwidth OR the
Frame Rate, not both. If the Bandwidth is defined, the frame
rate will be adjusted as necessary to achieve the specified
frame rate.
The default values for bandwidth is Unlimited , which allows
you to specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming
Enable streaming video for the mobile device by checking this
checkbox.
Resolution
The default resolution is set to 160x120.
Video Quality
Control
•
Constant Bit Rate: Select the desired fix bit rate.
•
Fixed Quality: Select the desired option. The default fix
quality is set to Normal.
Max. Frame Rate Select the desired Maximum bandwidth for the video stream.
Access Code Enter the code for accessing the live video from camera
through cell phone connection.
Video Adjustments
Power Line
Frequency Select the power line frequency (50Hz or 60Hz) used in your
region, to improve the picture quality under florescent lighting.
White Balance Select the desired option to match the current environment
and lighting.
Brightness If necessary, you can adjust the brightness to obtain a better
image. For example, if the camera is facing a bright light, the
image may be too dark. In this case, you can increase the
brightness.
Sharpness Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
Options
Microphone Enable audio by checking this checkbox. Using Audio will
increase the bandwidth requirements slightly.
Audio Type Select the desired audio type.
Speaker Enable speaker sound by checking this checkbox.
Time Stamp If enabled, the current time will be displayed on the Video
image.
Text Display Enable this setting if you want text to be displayed on the
Video image, and enter the desired text - up to 20 characters.
This feature is often used to identify each camera when
multiple cameras are installed.