- 3 -
button for 5 seconds until the blue and red indicators of Headset are flashing alternatively. If you
are wearing the Headset during the pairing process, you will hear two short high tones when the
Headset is ready for pairing.
Step 2: Initiate pairing process of your mobile phone. Refer to the manual of mobile phone for detail
process. You will see a new item “BT Headset” added in your Bluetooth device list after
searching process.
Step 3: You will be asked to enter pin-code to complete pairing, enter 1234 and confirm it. (Note: The
1234 is default pin-code pre-stored in Headset.)
The red indicator of Headset will turn off and the blue indicator will flash slowly after pairing completed
successfully.
Note:
1. If the Headset is not in pairing mode, your mobile phone won't find the Headset. Please set the
Headset on pairing mode
before letting your mobile phone search for the Headset.
2. If no pairing is possible for a period of time (approx. two minutes), the Headset will automatically
power off, and so the previous pairing (if any) is revoked. You may need to repeat steps 1 to 3 until
pairing succeeds
Making Calls
You are able to use the Headset to make calls when it is paired successfully with your mobile phone.
1.
Using voice dialing
– Press S1 button, waiting for a beep and say the name of the person you want
to call. Press S1 button again to cancel voice dialing.
2.
Using phone keys
– Dial the number on the mobile phone as you usually do. Once the call has
been set up, the voice will be transmitted to Headset automatically.
3.
Redial
– Press and hold S2 button for 3 seconds to redial the last number you called.
Answering/Ending Calls
1. When the Headset is powered on and the mobile phone rings, you will hear a musical tone and the
blue indicator will change to be quick flashing. Press S1 button to answer the call.
2. Press and hold S1 button for 3 seconds to reject the call.
3. If the Headset is powered off, press and hold S1 button for 3 seconds to turn it on and answer the
call.
4. Adjust Headset volume by pressing S1 button for volume up and pressing S2 button for volume
down.
5. End calls by pressing and holding S2 button for 3 seconds or do nothing.
Note
:
Due to the different design of some mobile phones, an auto-disconnect may happen even when the
Headset is powered on. In that case, the Headset won't ring when there is an incoming call. Press S1
button for 1 sec. to reconnect the Headset with mobile phone for an incoming call.
Transfer/Switch Calls
1. Press and hold S1 button for 3 seconds to transfer the call to mobile phone while talking on the
Headset. If you want to transfer the call back to Headset, press S1 button again.
2. Press and hold S2 button for 3 seconds to switch to second call if a second call is coming into while
talking on a call. This function only works under your mobile phone service provider provides such
service.
