Chapter 3 Operations
Chapter 3 Operations
19
18
3.4 Master Fingerprint
The three fingerprints of “00-02” are read as master fingerprints
Functions of master fingerprint
1. Unlock the door
2. Set code/fingerprint
3. Delete code/fingerprint
3.4.1 Operation of setting master fingerprint
Remove the Battery Box Cover, press the Set Switch, a long “Di…” sounded, red and blue light flashes alternately,
press “#” once, enter position number of master fingerprint”00-02” ,then press “#” again to confirm, and fingerprint
window lights up, indicating the lock is under the state of master fingerprint setting.
3.3 Fingerprint Enrollment
Remove the Battery Box Cover, press the Set Switch, a long “Di…” sounded, digital display shows “00” (stands for
the registered total fingerprint number). Red and blue light flashes alternately, continually press “#” twice. Red light
turns on, digital display shows any number from “03 to 99” (stands for the smallest position number of a new
fingerprint. If you want to enroll the fingerprint in a specific position, please press “#” first and input the specific
position number.) , fingerprint window lights up blue, indicating the lock is under fingerprint enrollment state.
Put the finger onto the fingerprint window. When a short “Di” is sounded, the first fingerprint identification succeeds. Do
not remove finger until a long “Di” is sounded, blue light flashes once, and digital display firstly shows“03”and then
black out, which indicates the success of the enrollment operation, and the fingerprint has been registered in“03” .
A
.
Following instruction A, but the red light flashes once, digital display shows “00” together with two short “Di. Di”. It
means the operation fails.
B
.
If the same fingerprint is enrolled for the second time, its previously registered position number will be shown on digital
display, blue light flashes one time and a long “Di…” sounded, and then exit fingerprint enrollment state.
C
.
Put the finger onto the fingerprint window. When a short “Di-” is sounded, the first fingerprint identification succeeds.
Do not remove finger until a long “Di-”is sounded, blue light flashes once, and digital display firstly shows”00”and then
black out, which indicates the success of the enrollment operation, and the position of this master fingerprint is “00”.
Following instruction A, but the red light flashes, together with two short “Di-Di-”.It means the operation fails.
A
.
B
.
3.4.2 Operation of setting other fingerprints with master fingerprint
Put the finger onto the fingerprint window. When a short “Di-” is sounded, the first fingerprint identification succeeds.
Do not remove finger until a long “Di-”is sounded, blue light flashes once, and digital display firstly shows “03”and then
black out, which indicates the success of the enrollment operation, and the fingerprint has been registered in the
position of “03”.
A
.
Press “#” continuously for 3 seconds, a long “Di…” sounded, red light and fingerprint window lights up. Put the master
finger onto the fingerprint window, after a long “Di…”is sounded, red and blue light flashes alternately, continually
press “#” twice, red light on, digital display shows any number from“03-99”(stands for the smallest position number of
a new fingerprint. If you want to enroll the fingerprint in a specific position, please press “#” first and input the specific
position number), fingerprint window lights up, indicating the lock is under fingerprint enrollment state.
Following instruction A, but the red light flashes, together with two short “Di-Di-”.It means the operation fails.
B
.
3.4.3 Operation of setting code with master fingerprint
Input an eight-digit code started with 01 or 02, press “#” to confirm, digital display shows correspondingly “n1”or”n2”,
accompanied with a short “Di-”from buzzer. Re-input the code again and confirm it by pressing”#”, a long “Di–-”
sounded, blue
light flashes once ,and “n1”or “n2” is shown again. It means the success of the setting operation
(Note: “n1”or “n2” is the corresponding code position)
A
.
Press “#” continuously for 3 seconds, a long “Di…” sounded, red light and fingerprint window lights up. Put the master
finger onto the fingerprint window, after a long “Di-”is sounded, red and blue light flashes alternately, then press “#”
once, red light on, digital display shows “--”