levante-products.com
LEV0412/Page 5 of 12/Issue
2
/0
1
.1
7
3.2 Operating modes
Your radiator incorporates four operating modes. The “learning”
mode is activated at the factory. To change the operating mode:
Simultaneously press and every time you want to change
the operating mode.
Light indicator 3 will change:
1) “Learning” mode: “slowly flashing” light.
2) Manual mode: light is OFF.
3) Sensor mode: fixed light.
4) “Forced” programming mode (via Smartbox App (not included)).
1) LEARNING MODE (factory activated):
During seven days and CONTINUALLY, week by week, your radiator
will be learning your life style.
The XRi emitter has 2 working profiles:
* Economic Profile “PE”
(Default factory settings)
This profile prioritizes the energy savings.
1) If there is detection:
2) If there is no detection:
Economy mode.
3) If there is no detection:
Anti-frost mode.
* Comfort profile “PC”
This profile prioritizes comfort and welfare.
1) If there is detection:
2) If there is no detection:
Economy mode.
3) If there is no detection:
Anti-frost mode.
Day by day, the XRi is “learning” the presence (comfort) periods and
the absence periods (economy).
After 7 days, the radiator will start working according to the
programmed presence periods (comfort) and the absent periods
(economy), depending on the chosen working profile.
The comfort periods in the following week will commence before
the programmed time so that the room will be warming up before
you enter.
Note:
The auto-programming period is continuous. The XRi updates
according to your life style variations, day by day, week by week.
2) SENSOR MODE:
1) If there is detection:
2) If there is no detection:
Economy mode.
The thermostat does NOT hold anything in memory.
3) MANUAL MODE:
In this mode, you decide when you want Comfort temperature,
Economy temperature or Anti-frost temperature.
When Manual mode is selected, you only have to choose Comfort,
Anti-frost or Economy and the desired ambient temperature.
3.3 Adjusting the temperature
In order to change the Comfort and Economy temperatures the
radiator must be in MANUAL mode (see point 3.2).
The factory-set temperatures are:
1) COMFORT TEMPERATURE = 20ºC
2) ECONOMY TEMPERATURE = 16ºC
3) ANTI-FROST TEMPERATURE = 5ºC
The anti-frost temperature (5ºC) cannot be changed.
3.3 “Open Window” Function
The radiator incorporates this automatic function.
If, in the room in which the radiator is installed, the ambient
temperature falls by more than 4 ºC, the heater will change over
to “Anti-frost” mode”.
NOTE: Factory-set parameters:
1) Cloak and current day are factory set.
2) Comfort temperature = 20 ºC.
3) Economy temperature = 16 ºC
4) Activated operating mode = “Learning” mode.
5) Activated working profile in “Learning”
Mode = Economic Profile “PE”
Comfort mode
Comfort mode
>30 minutes =
>30 minutes =
>12 hours =
>16 hours =
Comfort mode
>30 minutes =
