240V~50Hz
LEVPH500T
LEVPH1000T
LEVPH1500T
LEVPH2000T
Panel Heater
User Manual
CAUTION: PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
Care & Cleaning
Make sure that the heater is unplugged from the mains and is cool before you attempt to clean it. Wipe with a dry cloth
to remove dust or with a damp (not wet) cloth to clean stains. Ensure that no moisture gets into the heater. Do not use
abrasive cleaning powder, metal polish or furniture polish on any part of the heater.
Do
•
Do read the instructions carefully.
•
Do disconnect the heater from the mains supply when not in use or being cleaned.
•
Do position close to, but not directly beneath, a suitable mains outlet.
•
Do store in a cool and dry place when not in use.
Don’t
•
Do not use outdoors, for indoor use only.
•
Do not position immediately below a fixed socket outlet.
•
Do not position close to furniture or curtains where it might create a fire hazard.
•
Do not position in the immediate surrounding of a bath, shower or swimming pool.
•
Do not cover or restrict the air inlet or heat outlet vents.
•
Do not position the heater closer than 500mm to any overhanging surface.
•
Do not strain the mains lead.
•
Do not position the mains lead where it will cause anybody to trip over it.
•
Do not use the heater lying on its back, front or sides.
•
Do not run the mains lead under carpeting.
•
Do not use with an extension lead as it may overheat.
•
Do not use where excessive moisture is present.
•
Do not allow water to get into the interior of the heater.
•
Do not insert or allow any foreign objects to enter the heater.
•
Do not use in areas where petrol, paint or flammable liquids are used or stored.
•
Do not use in workshops or rooms where there are excessive amounts of dust.
•
Do not fit the heater to the walls in rooms where children or invalids may be left unattended.
Repairs
Do not attempt to repair this product yourself. Repairs can only be made by qualified service personnel. Repairs by
unqualified persons will invalidate the guarantee, but more importantly, could result in accident or injury. If this product
fails to work properly please return it to your nearest Levanté stockist.
CARE, CLEANING & REPAIRS
CEF0723/October 2008/Issue 1
Using the Timer Control
Turn the clock dial clockwise until the correct time aligns with the pointer. Raise the time segments for the required on/
off times and set the control switch to ‘timer controlled’.
SAFETY OVERHEAT PROTECTION
A thermal cut-out will switch off the heater if for any reason it overheats. if the cut-out operates, determine the reason
for overheating an correct it. The cut-out resets automatically when the heater cools down. This could take 10-20
minutes.
IF IN DOUBT, CONTACT A QUALIFIED ELECTRICIAN.
CEF0723 - LEVPH Instructions.indd 1
7/5/10 15:12:51
