Levana LV-TW300, Руководство пользователя

Страница: 12 / 26

CAMERA SETUP
Using the Camera’s Battery Power
You have the option to purchase a rechargeable battery pack that can be attached to the base of the camera.
When the battery life is low the LED on the front of the camera will be red and faded to warn you. The battery
pack can be plugged in to charge on its own, or charge while connected to the camera.
To Attach the Battery Pack to the Mount:
1. Place the top portion of the battery into the area,
located at the back, on the bottom of the camera
mount. (The descended square on the battery
will fit into the square area on the back portion,
on the bottom of the camera mount easily.)
2. Slide the battery pack upwards (to match with
the camera mount) so that the square is touching
the two power contacts on the lower mount of
the camera.
3. Turn the battery on by switching the ON/OFF
switch, located at the back of the battery to ON.
The camera’s power indicator LED should light up
red to indicate it is on and receiving power from
the battery.
To Plug in the Battery Pack:
1. Plug one end of the provided power adapter into
a power source.
2. Plug the other end into the power input located
on the back of the battery.
3. Once plugged in, a red light will appear on the
front of the battery.
4. If battery is hooked up and charging with the
camera, both LEDs will be lit up red.
5. When the battery is finished charging the red
LED on the battery will turn green.
10
1.
2.