If the Turn All
®
system is to be
used for a static lift as an inclined
cushion, the hose connection is
reversed according to the side that
is to be lifted.
The hose connection (B) is marked
with the letters “R” on the right
and ”L” for the left.
The pump is started and pumped until
the desired lift height is reached.
(Figure 3).
Then disconnect the hose connection (B)
from the pump (C) (Figure 4), and turn off
the pump.
Figur 1
Using the Turn All
®
system for static lifting
medical
®
1
2
3
Figure 1
Lift
right
side
Lift
left
side
Figure 2
B
B
If the lift must start on the right side of
the bed, seen from the foot end, the
hose connection with the letter “R” is
turned towards the text “Start side” on
the pump, as shown in (Figure 1).
C
C
Then disconnect the hose connection (B) from the pump (C)
(Figure 4).
The hose connection (B) is now closed with the cover (E)
(Figure 5).
The Turn All
®
system will now remain in this position until the
cover (E) is removed again and the air is thereby
automatically eliminated from the system.
Check the air chambers are completely emptied before
re-attaching the hose connection (B) to the pump (C).
Figure 3
Figure 4
Figure 5
B
B
C
E
If the lift must start on the left side of the
bed, seen from the foot end, the hose
connection with the letter “L” is turned
towards the text “Start side” on the pump,
as shown in (Figure 2).
Turn All
®
Bed
Mattress
Quick guide 3
Static lifting
*
For more information
read the user guide
