Safety notices
Le
u
ze electronic
MA 255
i
9
TNT
35/7-2
4
V
2
Safety notices
2.1
General safety notices
Documentation
All entries in this technical description must be heeded, in particular those in section "Safety
notices". Keep this technical description in a safe place. It should be available at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
Repair
Repairs must only be carried out by the manufacturer or an authorized representative.
2.2
Safety standards
The devices of the series MA 2xx
i
were developed, manufactured and tested in accordance
with the applicable safety standards. They correspond to the state of the art.
2.3
Intended use
Attention!
The protection of personnel and the device is guaranteed only if the device is operated in a
manner corresponding to its intended use.
Areas of application
The MA 255
i
modular interfacing unit is used for connecting Leuze devices such as bar
code- or 2D code readers, hand-held scanners, RFID read-write devices, etc. directly to the
fieldbus. A detailed list can be found in "Description of functions" on page 7.
