Leuze BPS 300i Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 94

background image

Care, maintenance and disposal

Leuze electronic GmbH + Co. KG

BPS 307i

73

11

Care, maintenance and disposal

11.1

Cleaning

If there is dust on the device:

Ä

Clean the device with a soft cloth; use a cleaning agent (commercially available glass cleaner) if neces-
sary.

NOTICE

Do not use aggressive cleaning agents!

Ä

Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.

11.2

Servicing

The device does not normally require any maintenance by the operator.

Repairs to the device must only be carried out by the manufacturer.

Ä

For repairs, contact your responsible Leuze subsidiary or Leuze customer service (see chapter 12 "Ser-
vice and support").

11.2.1 Firmware update

A firmware update can only be performed by Leuze Service on-site or at the company headquarters.

Ä

For firmware updates, contact your responsible Leuze subsidiary or Leuze customer service (see chap-
ter 12 "Service and support").

11.2.2 BCB repair with repair kit

If a bar code tape was damaged, e.g., by falling parts, you can download a repair kit for the BCB from the
Internet.

www.leuze.com > Products > Measuring Sensors > Bar Code Positioning Systems > BPS 300i
> (Name of the BPS) >

Tab

Downloads > Repair kit

.

NOTICE

Do not use the BCB repair kit on a permanent basis!

Ä

Use the bar code tape created with the repair kit only temporarily as an emergency solution.
The optical and mechanical properties of the self-printed bar code tape do not correspond to
those of the original bar code tape. Self-printed bar code tape should not remain in the sys-
tem on a permanent basis.

Ä

Original repair tapes (BCB G30 … RK or BCB G40 … RK) with custom tape start value, tape
end value, custom length in standard heights of 25 mm and 47 mm can be found on the
Leuze website in the accessories for the BPS 300 devices.
An entry wizard is available for repair tapes on the Leuze website under devices BPS 300 -
Accessories. The entry wizard provides support when entering the individual pieces of tape
data and creates a query or order form for the desired repair tape.

Ä

Repair tapes are available up to a maximum length of 5 m per repair tape. Repair tapes
longer than 5 must be ordered as special tapes in the entry wizard.

NOTICE

In the repair kit files, you will find all position values with 30 mm grid (BCB G30 …) and 40 mm
grid (BCB G40 …).

Layout:

• BCB G30: 0.9 m of bar code tape is provided on each A4 sheet.

• Five lines of 18 cm with six code-information segments of 30 mm each

• Tape lengths: from 0 to 9999.99 m in various files; each 500 m

«
...
71
72
73
74
75
...
»

Содержание BPS 300i































































































Отзывы:

Нет отзывов

Похожие инструкции для BPS 300i

Бренд: UEi Страницы: 20

Бренд: Hach Страницы: 138

Бренд: Omega Engineering Страницы: 22

IRmadillo DOC1048R

Бренд: Keit Страницы: 27

WALLACE & TIERNAN P7 ADVANCED

Бренд: Evoqua Страницы: 98

Бренд: Trotec Страницы: 14

Бренд: Hanna Instruments Страницы: 2

Digital Piano CA440

Бренд: Kawai Страницы: 48

Бренд: ICP DAS USA Страницы: 71

Бренд: CONDTROL Страницы: 11

Бренд: Milwaukee Страницы: 17

Бренд: Kane Страницы: 36

LaserRange-Master T4 Pro

Бренд: LaserLiner Страницы: 68

Proline Promag 50H

Бренд: Endress+Hauser Страницы: 52

Бренд: YOKOGAWA Страницы: 123

Бренд: Technitone Страницы: 16

Бренд: YOKOGAWA Страницы: 12

Бренд: JETI model Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды