Electrical connection
Leuze electronic GmbH + Co. KG
CML 730i
59
X3 pin assignment (transmitter)
The pin assignment on the transmitter for devices with fieldbus interface is the same as for IO-Link/analog;
see chapter 7.5.3 and see table 7.5.
Connection cables: see table 21.7
7.6.2 X2 pin assignment – CML 700i with CANopen interface
5-pin, M12 socket (A-coded) for a device with CANopen interface for connecting to BUS IN/BUS OUT.
1
M12 socket (5-pin, A-coded)
Figure 7.12: X2 connection – CML 700i with CANopen interface
Table 7.7:
X2 pin assignment – CML 700i with CANopen interface
Interconnection cables: see table 21.11.
7.6.3 X2 pin assignment – CML 700i with PROFIBUS or RS 485 Modbus interface
5-pin, M12 socket (B-coded) for a device with PROFIBUS or RS 485 Modbus interface for connecting to
BUS IN/BUS OUT.
1
M12 socket (5-pin, B-coded)
Figure 7.13: X2 connection – CML 700i with PROFIBUS or RS 485 Modbus interface
Table 7.8:
X2 pin assignment – CML 700i with PROFIBUS or RS 485 Modbus interface
Connection cables: see table 21.13.
PROFIBUS termination: see table 21.17 and see table 21.19.
1
2
Pin
X2 – CANopen interface
1
SHD: FE functional earth, shield
2
n.c.
3
CAN_GND: ground (0 V)
4
CAN_H:
5
CAN_L:
1
2
Pin
X2 – PROFIBUS/RS 485 Modbus interface
1
VP: +5 V for bus termination
2
PB_A: receive/transmit data, A-cable (Tx-)
3
PB_GND: ground (0 V)
4
PB_B (P): receive/transmit data, B-cable (Tx+)
5
SHD: FE functional earth, shield
