Safety
Leuze electronic GmbH + Co. KG
BPS 37
7
2.5
Laser safety notices
Figure 2.1: Laser apertures, laser warning and information signs
ATTENTION, LASER RADIATION – CLASS 2 LASER PRODUCT
Do not stare into beam!
The device satisfies the requirements of IEC 60825-1:2014 safety regulations for a product of
laser class 2 as well as the U.S. 21 CFR 1040.10 regulations with deviations corresponding to
"Laser Notice No. 56" from May 8, 2019.
Never look directly into the laser beam or in the direction of reflected laser beams!
If you look into the beam path over a longer time period, there is a risk of injury to the retina.
Caution: Opening the device can lead to dangerous exposure to radiation
Do not point the laser beam of the device at persons!
Interrupt the laser beam using a non-transparent, non-reflective object if the laser beam is
accidentally directed towards a person.
When mounting and aligning the device, avoid reflections of the laser beam off reflective
surfaces!
CAUTION! Use of controls or adjustments or performance of procedures other than specified
herein may result in hazardous light exposure.
Observe the applicable statutory and local laser protection regulations.
The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
NOTE
Affix laser information and warning signs!
Laser information and warning signs are attached to the device (see Figure 2.1):
A Laser aperture
B Laser warning sign
C Laser information sign with laser parameters
B
B
C
A
