Leuze electronic ODS 9 Скачать руководство пользователя страница 51

Страница: 51 / 72

Connecting to a PC – Sensor Studio

Leuze electronic

ODS 9

8.2.6

Installing the DTM and IODD

Prerequisites:

• The sensor is connected to the PC via the IO-Link USB master.

• FDT frame and driver for IO-Link USB master are installed on the PC.

Select the

IO-Link device DTM (User Interface)

installation option and follow the instructions on the

screen.

The installation wizard installs the DTM and the IO Device Description (IODD) for the sensor.

NOTICE

DTM and IODD for all IO-Link devices currently available from Leuze electronic are installed.

8.2.7

Importing device descriptions

Proceed as follows to manually add device descriptions (DTM and IODD):

Unpack the downloaded ZIP file (e.g.

Leuze_electronic-ODS9-20180209-IODD1.1.zip

) to a suitable di-

rectory on your hard drive, e.g.

ODS9-20180209-IODD1.1

Copy the directory

ODS9-20180209-IODD1.1

to the following directory:

C:\ProgramData\Leuze electronic\IO-Link Device DTM\IO-Link DDs

Open the

Sensor Studio

configuration software. If a project is already open, close it using the menu

command

File > New

Update the DTM general catalog:

Tools > DTM catalog management

Click the [Find installed DTMs] button.
Mark the required DTMs in the

Known DTMS

list and move them to the

Current DTM catalog

list ([>]

button). You need at least the DTM for the used sensor and the communication DTM IO-
Link USB Master 2.0.

Click [OK] to exit DTM catalog management.

8.3

Starting the Sensor Studio configuration software

Prerequisites:

• The sensor has been mounted (see chapter 5 "Mounting") and connected (see chapter 6 "Electrical

connection") correctly.

• The

Sensor Studio

configuration software is installed on the PC (see chapter 8.2 "Installing Sensor Stu-

dio configuration software and IO-Link USB master").

• The sensor is connected to the PC via the IO-Link USB master (see chapter 8.2 "Installing Sensor Stu-

dio configuration software and IO-Link USB master").

Start the

Sensor Studio

configuration software by double-clicking the

Sensor Studio

icon (

The

mode selection

of the

project wizard

is displayed

Содержание ODS 9









































































Результаты поиска

Содержание ODS 9

Отзывы:

Похожие инструкции для ODS 9

Бренды по названию

Популярные бренды

Leuze electronic ODS 9, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание ODS 9

Отзывы:

Похожие инструкции для ODS 9

Бренды по названию

Популярные бренды