Leuze electronic MSI-TB Series, Оригинальная инструкция по эксплуатации

Страница: 18 / 37

Leuze electronic MSI-TB 18
When using Deflecting Mirrors, the following must be observed:
Range loss per Deflecting Mirror of approx. 15 %.
Deflecting Mirrors must not be soiled.
Environmental conditions (vapors or dust-laden air considerably limit the range).
Arrange the Deflecting Mirror so that the optical axis is aligned with the center of the mirror (see
figure 6.5).
Figure 6.5: Arrangement of the Deflecting Mirrors
once prior to establishing the electrical connection
competent person
Table 6.4: Checklist mounting the light beam safety device
Do the beam heights satisfy the requirements acc. to EN 999 (see table 6.1)?
Is the safety distance to the hazard location maintained (see chapter 6.1.1 Calculating
the safety distance )?
Is the minimum distance to reflective surfaces maintained (see chapter 6.1.3 Minimum
distance to reflective surfaces )?
Is it ensured that light beam safety devices cannot mutually influence one another?
Can the hazard location or the danger zone only be accessed through the protective
field?
Is it ensured that the protective field cannot be circumvented?
Do the transmitter and receiver connections point in the same direction?
Is the light beam safety device mounted acc. to the corresponding instructions provided
by the manufacturer?