Leuze electronic GmbH + Co. KG
In der Braike 1 D-73277 Owen
We reserve the right to make changes
[email protected] • www.leuze.com
Tel. +49 (0) 7021 573-0
09/2016 - 50134630 - 4/13
3
Function Diagram
(1) Enabled in case of synchronous activation of both actuators. (2) Enabled
in case of synchronous activation of both actuators. If on of the actuators is
released the unit is immediately disabled. The unit can be enabled again
only after both actuators have been released. (3) Not enabled in case of
asynchronous activation.
A1 / A2 Power Supply, LED SUPPLY
Actuator S1
Actuator S2
K1, LED K1
K2, LED K2
Synchronous Monitoring
Y1 / Y2 FEED BACK
13/14, 23/24
31/32
t
E
= Response time, t
A
= Release time,
t
W
= Recovery time, t
S
= Synchronous monitoring time
4
Technical Data
Supply
Rated voltage U
N
AC/DC 24 V
Rated power
DC 2.4 W
AC 1.9 W / 3.1 VA
Residual ripple
2.4 V
ss
Rated frequency
50 ... 60 Hz
Opearting range
0.85 ... 1.1 x U
N
Isolation between supply circuit / control circuit
no
Control circuit
Internal operating voltage (Y12 -- Y14 or Y22 -- Y24 and Y1),
used only for the supply of the inputs Y11 -- Y21 and Y2
DC 24 V
inrush current
≈
3 A
Fusing
PTC resistor
Response time t
E
K1, K2
40 ms
Release time t
A
< 50 ms
Simultaneity check t
S
≤
500 ms
Recovery time t
W
≤
250 ms
Output circuit
Contacts
2 NO safety contacts positively driven, 1 NC control contact
Switching voltage U
n
AC 230 V
Max. rated current I
n
per contact
6 A
Max. total current for all contacts
12 A
Application category according to EN 60947-5-1
AC-15: Ue AC 230 V, Ie 3 A
DC-13: Ue DC 24 V, Ie 2.5 A
Short-circuit protection, max. fuse element type gG
6 A
General data
Creepage and clearance
acc. EN 60664-1
Overvoltage category
III
Rated withstand voltage
4 kV
Contamination level: internal/external
2 / 3
Test voltage
AC 300 V
B
10d
I
e
DC-13 / 24V
0,63 A
10 * 10
6
1,25 A
1,62 * 10
6
2,5 A
435.000
Protection degree Housing / Terminals acc. to EN 60529
IP 40 / IP 20
Ambient temperature working range / storage range
-25 ... +55 / -25 ... +75 °C
Weight
0.2 kg
Terminals and connection
screw-type terminals
spring-type terminals
Single-core or finely stranded
1 x 0.2 - 2.5 mm² / 2 x 0.2 - 1.0 mm²
2 x 0.2 - 1.5 mm²
Finely stranded with wire-end ferrule
1 x 0.25 - 2.5 mm² / 2 x 0.25 - 1.0 mm²
2 x 0.25 - 1.5 mm²
AWG conductor size (only use Cu wires)
26 - 14
24 - 16
Max. tightening torque
0.5 to 0.6 Nm (5 - 7 lbf-in)
---
Stripping length
7 mm
1
2
3
t
A
t
A
>t
W
t
W
<t
S
>t
S
t
E
t
E
<t
S
