Electrical connection
Le
u
ze electronic
MA 20
8
i
3
1
TNT
35/7-2
4
V
Notice!
Ensure adequate shielding. The entire connection cable must be shielded and earthed. The
signal lines must be stranded in pairs.
Use CAT 5 cable for the connection.
Notice!
For the MA 208
i
as standalone device or as the last participant in a linear topology,
termination on the BUS OUT socket is
not
mandatory!
7.5
Device interfaces
Figure 7.4:
Open the MA 208
i
7.5.1
RS 232 device interface (accessible after opening the device, internal)
The device interface is prepared for the system plugs (PCB connectors) for Leuze devices
RFI xx, RFM xx, BCL 22 as well as BCL 32, VR with KB 031.
Figure 7.5:
RS 232 device interface
