Installation and mounting
Leuze electronic
LSIS 4xx
i
25
TNT
35/7-2
4
V
4.4
Lens replacement LSIS 4xx
i
- C-mount devices
Attention!
Replace the lens in an environment that is as clean, dry and dust-free as possible. When
doing so, make sure the lens cover is properly mounted to ensure protection class IP 65 /
IP 67 is fulfilled.
First loosen the 4 Phillips screws on the lens cover and remove the cover to the front as
shown in figure 4.8.
Figure 4.8:
Lens replacement for C-mount devices
Unscrew the installed C-mount lens from the lens mount in a clean environment by
turning it counter-clockwise and screw the new lens on by turning it clockwise on the lens
mount of the LSIS 4xx
i
M49-X9.
