manualshive.com logo in svg

Leuze electronic LSIS 222, Техническое описание, Страница: 21 / 95

Поделиться
Скачать
Leuze electronic LSIS 222 Скачать руководство пользователя страница 21

Installation and mounting

Leuze electronic

Technical description LSIS 22x

19

TNT

 35/7-2

4

V

BTU 300M - D… mounting device

Figure 4.4:

BTU 300M - D… mounting device

4.3

Device arrangement

4.3.1

Selecting a mounting location

In order to select the right mounting location, several factors must be considered:

• The reading distance resulting from the code size and code type (see figure 4.5).
• The permissible cable lengths between the LSIS 22x and the host system depending 

on which interface is used.

• The control panel with LEDs and trigger button should be very visible and 

accessible.

• Mount the LSIS 22x so that the codes that are to be read are not exposed to direct 

sunlight or strong ambient light.

When selecting a mounting location, pay further attention to:

• Maintaining the required environmental conditions (temperature, humidity).
• Possible soiling of the viewing window due to liquids, abrasion by boxes, or 

packaging-material residues.

• Lowest possible chance of damage to the LSIS 22x by mechanical collision or 

jammed parts.

All dimensions in mm

Содержание LSIS 222
































































































Отзывы:

Нет отзывов