Leuze electronic CSL710-R05-1280.A/L-M12, Оригинальная инструкция по эксплуатации

Страница: 63 / 98

Starting up the CSL 710 with IO-Link interface
Leuze electronic CSL 710 63
Configuration for block evaluation of beam areas (group 9)
In this group, a detailed area configuration can be displayed and a beam area configured for the
block evaluation.
Parameter Index Sub-
index
Data type Access Value range Default Explanation
Teach height area 75 0 unsigned 8 RW 0 … 7 0 Active: all beams free
Not active: at least one beam interrupted
1: Area 1
…
8: Area 8
Display detailed area
configuration
77 0 unsigned 8 WO 1 … 8 Select the desired area (1 … 8) for which the con
-
figuration is to be edited in detail.
0: Area 01
1: Area 02
2: Area 03
…
7: Area 08
Configuration of area 1
Configuration of area 01 90 1 record
112 bit, iso
-
lated access
to sub-index
not possible
RW Configuration of the area: definition of the status
conditions so that the area takes on a logical 1 or 0.
For diagonal- or crossed-beam mode, the numbers
of the logical beams are to be entered.
Area 90 1
(bit
offset
= 104)
unsigned 8 RW 0 … 1 0 0: Not active
1: Active
Active beam 90 1
(bit
offset
= 96)
unsigned 8 RW 0 … 1 0 0: Light switching (beam is active if light path is
free)
1: Dark switching (beam is active if light path is
interrupted)
Start beam of the area 90 1
(bit
offset
= 80)
unsigned 8 RW 1 … 1774 1
End beam of the area 90 1
(bit
offset
= 64)
unsigned 8 RW 1 … 1774 1
Number of active beams
for area ON
90 1
(bit
offset
= 48)
unsigned 16 RW 0 … 1774 0
Number of active beams
for area OFF
90 1
(bit
offset
= 32)
unsigned 16 RW 0 … 1774 0
...... .... .... .. .. .. .......
...... .... .... .. .. .. .......
Configuration of area 08
Configuration of area 08 97 8 record
112 bit, iso
-
lated access
to sub-index
not possible
RW Configuration of the area: definition of the status
conditions so that the area takes on a logical 1 or 0.
For diagonal- or crossed-beam mode, the numbers
of the logical beams are to be entered.
Area 97 8
(bit
offset
= 104)
unsigned 8 RW 0 … 1 0 0: Not active
1: Active
Active beam 97 8
(bit
offset
= 96)
unsigned 8 RW 0 … 1 0 0: Light switching (beam is active if light path is
free)
1: Dark switching (beam is active if light path is
interrupted)