30
BCL 558
i
Leuze electronic
4.6
Heater
For low-temperature applications to min. -35°C (e.g. in cold storage), the bar code readers
of the BCL 558
i
series can optionally be permanently fitted with a built-in heating and these
bar code readers purchased as separate device models.
4.7
External parameter memory
The optionally available external parameter memory –
based on a USB memory stick (compatible with
version 1.1) – is housed in an external hood with
integrated connectors which cover the USB service
interface when installed (IP 65).
By having available a copy of the current parameter
set of the BCL 558
i
, the external parameter memory
makes it easy and reduces the time needed to replace
the BCL 558
i
on site. A manual configuration of the
exchanged device is thereby omitted.
The procedure for transferring the configuration with
the aid of the external parameter memory is described
on page 152.
The delivery contents of the external parameter memory include the hood with integrated
connectors with unscrewable cover and the USB memory stick.
Figure 4.9:
External parameter memory
Notice!
To mount, the cover of the service interface must be unscrewed. Then take the USB memory
stick and plug it into the USB connection on the BCL 558
i
. Then, take the connector hood
of the USB memory stick and screw this over the plugged-in USB memory stick to the service
interface to close the system and ensure protection class IP 65.
USB memory stick
