Leuze electronic BCL 608i Скачать руководство пользователя

Страница: 49 / 92

Starting up the device - Configuration

Leuze electronic

BCL 608i

Starting up the device - Configuration

This chapter describes basic configuration steps which you can carry out either via the webConfig tool or

the display.
Via the webConfig tool
The most convenient way to configure the device is via the webConfig tool. Only the webConfig tool gives

you access to all settings of the device. To use the webConfig tool, you need to establish a USB connec

tion between the device and a PC/laptop.

Via display
The display offers basic configuration options for the device. Configuration via the display is appropriate if

you want to configure simple reading tasks and you cannot or do not want to set up a USB connection

between the device and a PC/laptop.

10.1 Measures to be performed prior to the initial commissioning



Before commissioning, familiarize yourself with the operation and configuration of the device.



Before connecting the supply voltage, recheck all connections and ensure that they have been properly

made.



Check the applied voltage. It must be in the range b10V … 30 V DC.

Connecting functional earth FE



Ensure that the functional earth (FE) is connected correctly.

10.2 Starting the device



Connect the +10 … 30 V DC supply voltage (typ. +24 V DC); the device starts up and the bar code read

ing window appears on the display.

By default, parameter enabling is deactivated and you cannot change any settings. If you wish to carry out

the configuration via the display, you must activate parameter enabling (see chapter 8.6 "Operation",

Parameter enable).



As a first step, you need to set the communication parameters of the device.

You can make the necessary settings via the display or via the webConfig tool. The settings made by

means of the webConfig tool are described here only briefly.

10.3 Setting the communication parameters

With the communication parameters, you determine how data is exchanged between device and host

system, monitor PCs etc.
The communication parameters are independent of the topology in which the device is operated (see

chapter 7.7 "Ethernet topologies").

10.3.1 Manually setting the IP address

If your system does not include a DHCP server or if the IP addresses of the devices are to be set perma

nently, proceed as follows:



Have the network administrator specify the data for IP address, net mask and gateway address of the

device.

Notes on use see chapter 9 "Commissioning – Leuze electronic webConfig tool".

Notes on use see chapter 3.5.2 "Status display and operation".

NOTICE
Unimpaired operation is only guaranteed when the functional earth is connected properly. All electrical

disturbances (EMC couplings) are discharged via the functional earth connection.

Содержание BCL 608i





























































































Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды

Leuze electronic BCL 608i, Руководство по эксплуатации

Результаты поиска

Содержание BCL 608i

Отзывы:

Похожие инструкции для BCL 608i

Бренды по названию

Популярные бренды