Leupold GX-6c, Руководство по эксплуатации

Страница: 25 / 32

22
is reached . Once 240 yards (220 meters) has been reached,
it will reset to the 6-iron distance plus 5 yards/meters and
start over again . When the appropriate distance is displayed,
let the unit sit idle for at least 30 seconds until an automatic
power down occurs, or simply press and hold MODE for at
least 2 seconds . To continue through the Quick Set Menu and
manipulate another mode, press and release MODE until the
appropriate icon is displayed .
INPUT THE TEMPERATURE AND ALTITUDE AT WHICH THE
CLUB SELECTOR SETUP WAS MEASURED.
Once the striking distances have been input, press MODE and
follow the steps below:
1) The last saved temperature will be flashing
in the bottom portion of the display . If you
wish to input a temperature other than the
one shown, proceed to step 2 . To save the
shown temperature, press MODE and skip
to step 3 below .
2) Press POWER to begin incrementing through the temperature
settings . The default setting is 75 degrees °F (25 degrees °C) .
Pressing POWER will advance through a range of 30 degrees
to 120 degrees F (0 degrees to 50 degrees °C) in 5 degree
increments . When the appropriate temperture is displayed,