Page 2 of 8
STEP 1:
STEP 2:
STEP 3:
BACK OF
VEHICLE
Install each Ratchet Assembly
[E]
to the Base
[A]
on the side of the Base CLOSEST to the “U-Tube”
using one (1)
Angle Bolt
[B]
, two (2) 1/4” Washers
[C]
and one (1) Nylock Nut
[D]
running through the Base and the small Webbing
Strap attached to the Ratchet Assembly as shown. [Fg. 1 & 2]
In the same manor as STEP 1, install each Long Webbing Strap
[F]
to the Base
[A]
on the side of the Base FURTHEST
to the “U-Tube”
) using one (1) Angle Bolt
[B]
, two (2) 1/4” Washers
[C]
and one (1) Nylock Nut
[D]
running through the
Base and the looped end of the Long Webbing Strap as shown. [Fg. 3 & 4]
Set the Base
[A]
squarely
centered onto the rear spare
tire of the vehicle.
NOTE:
The Ratchet Assembly
[E]
located closest to the
U-Tube
MUST
be mounted
facing away from the vehicle.
[Fg. 5 & 6]
F
A
A
A
A
F
E
C,D
B,C
A
E
B
B
C
C
C A
D
D
B
C
C
F
E
F
C
E
D
U-TUBE
U-TUBE
U-TUBE
[Fg. 1]
[Fg. 3]
[Fg. 5]
[Fg. 6]
[Fg. 2]
[Fg. 4]
