29
30
2) Different mobile phone NFC sensor area and sensitivity will be
different, you may find the best sensor NFC position use the
watch sensor, and then use the electronic business card function.
12.
Why is Bluetooth disconnected during the upgrade?
The data transmission capacity needed is large during the
upgrading, it needs to improve Bluetooth transmission efficiency. In
order to ensure the success of the transmission rate change, the
Bluetooth needs to be disconnected and the Bluetooth connection
will be automatically re-established after the modification.
7. Basic parameters
t%BUB4UPSBHF
：
30 days
t%BUB4ZODISPOJ[BUJPO
：
Bluetooth 4.0
t#MVFUPPUI$POOFDUJPO%JTUBODF
：
10 m
t#BUUFSZ%VSBUJPO
：
8 month
t8BUFSQSPPG
：
3ATM
8. Turn off the Bluetooth
Factory mode
If you don’t need to use the watch for a long period of time, you can
set the watch into the factory mode. Press the side button and hold
on for 6 seconds until the watch vibrates and the LED light flashes 7
times, the watch hands stop and the watch enters into factory mode.
Note:
the data stored in the watch will be cleaned up and all the
settings go to default state. The data stored in the APP will remain
and you can view the history data on phone.
Temporally turn off the Bluetooth
If you don’t need to use the Bluetooth function temporally, you can
turn off the Bluetooth of the watch to save the power. Press the side
button and hold on for 3 seconds, the Bluetooth will be turn off and
the watch act as a normal watch.
Note:
the data stored in the watch will not be cleaned up when you
turn off the Bluetooth.
9. Warranty
12 months warranty from the order date.
Note:
the battery is consumable and the warranty doesn’t cover it.
Содержание LC-SW01
Страница 17: ......
