Page 3 of 4
STEP 4:
STEP 5:
OPERATION: BICYCLE MOUNTING
Using the holes located at the top of the Wing
[H]
, insert
two (2) Wheel Cradles
[I]
into the Wing
facing in opposite
directions
.
Secure each Wheel Cradle
[I]
with a Retainer Clip
[J]
.
[Fg. 8]
A
E
G
G
H
D
I
I
J
J
C
A
H
H
H
FOAM BUMPERS
[Fg. 7]
[Fg. 8]
[Fg. 9]
[Fg. 6]
H
Slide the Foam Pads on the Wings
[H]
down to reveal the holes near the edge
of the Wing.
Align the holes on the edge of the Wing
[H]
with holes located on the Base
[A]
and the Upper Support
[G]
. [Fg. 6]
Secure the Wings
[E]
to the Base
[A]
and Upper Support
[G]
using one (1)
6mm Bolt
[C]
and one (1) 6mm Nut
[D]
per Wing as shown. [Fg. 7]
Hang bicycles by the tires on the Wheel
Cradles
[I]
with the chain rings to the
outside. [Fg. 9]
Adjust the Foam Bumpers located on
the Wings
[H]
to protect the frame of the
bicycle.
