PAGE 5 OF 5
FIT TIPS:
USE WITH RACK BAR ACCESSORIES
The Seal Skin Cover is designed to be
very tight.
If you are having difficulty fitting the cover, loosen all of the End Gate Brackets and place the Seal Skin cover
on with the brackets loose. Once the cover is fit over the trailer,
then
re-tighten the brackets.
Four (4) velcro Accessory Flaps are sewn into the
cover to allow for Rack Bar Mounts (sold separately).
To use with Rack Bar mounts, align the mounts on
the trailer to the Accessory Flaps on the cover.
Once positioned, attach the cover (STEPS 5-8) under
the Rack Bars and then close the velcro flap over
each vertical mounting bar to seal the cover.
Technical Support:
For assistance with this product, please contact us:
Let’s Go Aero, Inc.
5353 N. Union Blvd, Suite 103, Colorado Springs, CO, 80918, USA
Phone: 877-464-2376 or 719-630-3800
Email: [email protected]
To learn more about our products and stay informed about useful options for transporting all kinds of
gear with your carrier, be sure to visit our website: www.LetsGoAero.com
To register your product, visit the Let’s Go Aero website at www.LetsGoAero.com
Patent and trademark protected. Copyright © 2022, Lets Go Aero, Inc., All rights reserved.
Let’s Go Aero covers have a one (1) year limited warranty period to the original owner from the time of purchase against defects
in improper workmanship. Be sure to inspect your cover before use. Normal wear and tear, improper use, abuse, or alteration
are not covered under the warranty policy, nor damage caused by weather.
Let’s Go Aero will replace or repair defective parts. Replacement parts may be new or re-built at Let’s Go Aero’s sole discretion.
Proof of purchase (receipt) must be provided. If you do not provide proof of purchase, or if your warranty period has ended,
replacement parts can be purchased. Contact Let’s Go Aero for assistance at 877-464-2376 or 719-630-3800, visit
www.letsgoaero.com, or email [email protected].
WARRANTY INFORMATION
ACCESSORY
FLAP
RACK BAR
(SOLD SEPARATELY)
