Page 1 of 5
Copyright
©
2021, Lets Go Aero, Inc., All rights reserved.
Nelson Accessory Adapter Kit for Roof and Overhead Fly Rod Accessories (not included).
Rated for 50 lbs on Flyrod Adapter Cradles only (25 lbs per Adapter Cradle). Increases the
overall V-Wing Capacity to 120 lbs with included Tie-off Kit.
Fly Rod Adapter Kit
Adapter kit to install flyr rod, roof bar,overhead Fly Rod
accessories on Nelson Multi-Sport Carrier (not included)
Part No. B02028
2
2
2
2
2
2
2
FLYROD CRADLES
TIE-OFF PLATE
STAR NUT
1/4-20 BOLT
SUSPENSION CABLE
WEBBING STRAP
S-HOOK WITH CAM BUCKLE
PARTS
QTY. DESCRIPTION
NOTICE:
All Manual information is subject to change without notice. Revised editions
will be available for free download at LetsGoAero.com. Manual information is considered
factual until made obsolete by a revised version.
Follow this QR-Code or visit
LetsGoAero.com/manuals to check for an updated version:
A
B
C
D
E
F
G
STEP 1
: Preparation
Remove the End Caps located on the top of each Nelson Wing
Support Arm
NOTE:
This manual assumes you have already completed assembly of your original Nelson model carrier.
[Fg. 1]
Revision Date: 06/15/21
NELSON WING
SUPPORT ARM
END CAP
