Lesswire Wi2U, Быстрый старт

Страница: 18 / 23

34
Counter
The volume counter displayed in the status bar at the top indicates the amount of data
transferred with the SIM card in MB (downloaded/uploaded) since the last reset. The
counters can be reset from within this setting.
Advanced 3G / UMTS settings
For some providers it is necessary to make advanced setting changes. For most pro-
viders, these settings are not required. You can access advanced settings by clicking
on the
„Advanced“ link.
User
Entering a user name for dial-in to the UMTS network.
Password
Entering a password for dial-in to the UMTS network.
Authentication
Authentication procedure selection (PAP, CHAP, no authentication).
DNS1
Specifying a static domain name server.
DNS2
Specifying a second static domain name server.
35
English V
ersion
Wi2U public hotspot | Quick Start Guide
WLAN
Under the WLAN tab you can adjust all the WLAN specific settings.
SSID (Network name)
Here you can change the SSID if you wish. Default setting: „ wi2u-nnnnn“ (see sticker
on the underside of the device or on the back of this Quick Start Guide). Transmission
of the SSID can be suppressed by marking the check box. In this case, the WLAN
network is no longer visible.
Region
Here you can determine the regulatory domain (EU, U.S., Japan). Depending on the
region, specific channels are faded in or hidden.
Channel
Here you can choose which channel the integrated WLAN access point of the Wi2U
router should send. The default setting is „
Channel 1“.
Encryption
Here you can select what encryption your Wi2U router should use. Default setting:
„
WPA & WPA2 mixed“.