Tools required:
9/16” ratchet or wrench. (Ratchet recommended.)
Note:
These instructions are intended for various models and configurations. Your products may not
look exactly as those shown in the diagrams.
Important
:
The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product remains strong and
stable for many years of use.
Weight Capacity:
All guest chairs in these series have a weight capacity of
400 lbs
.
per seat, oversize
chairs
500 lbs
., and loveseats
550 lbs
., unless otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Section 1 - Chairs & Loveseats without Arms
1. Unpack and identify all parts.
2. Attach seat to back using 2”
bolts and washers into threaded
inserts, as shown in figures 1
and 2. Keep bolts slightly loose
for now.
3. Place chair upright on a level
surface and align bottom edge
of seat with bottom edge of
back.
4. Tighten all bolts securely.
5. Your product is now assembled
and ready to use.
© 2014 Lesro Industries, Inc.
June 2014
Assembly Instructions
For Siena & Ravenna Chairs, Loveseats and Sofas
Section 2 - Chairs & Loveseats with Arms
1. Follow instructions in Section 1 to
attach seat to back. Align bottom
edge of seat with bottom edge of
back and tighten bolts securely.
2. Attach arms to seat and back
using 2” bolts and washers into
threaded inserts, as shown in
figures 3 and 4. Start each bolt
first, until all have caught a few
threads, then finger tighten only.
Hint: start with bolt in back
cushion first, followed by front
seat bolt, then middle bolt last.
3. Place chair upright on a level
surface and align bottom edges of
seat, back and arms.
4. Tighten all bolts securely.
5. Your product is now assembled
and ready to use.
Figure 3
Align edges when
tightening bolts
Figure 2
Figure 1
Figure 4
Align
edges
when
tightening
bolts
