Dual Heating/Single Heating/Granules
EN
Please read this manual carefully before using this machine,
and keep it for future reference
Each plastic extrusion welder must undergo a double test of 100% performance
and safety before leaving the factory.
Application
Precautions
Used for welding thermoplastic materials PE and PP (sheet + film material) in the
following fields：
Container Fabrication Piping Fabrication
Electroplating Anti-corrosion Equipment Landfill
Repair of Geomembrane Environmental Protection Equipment
Please confirm that the machine is turned off and unplugged
before disassembling the welding machine so as not to be
injured by live wires or components inside the machine.
The welding machine generates high temperature and high
heat, which may cause fire or explosion when used incorrectly,
especially when it is close to combustible materials or explosive gas.
Please do not touch the air duct and nozzle(during welding work or
when the welding machine has not completely cooled down),
and do not face the nozzle to avoid burns.
The power supply voltage must match the rated voltage
marked on the welding machine and be reliably grounded. Connect
the welding machine to a socket with a protective ground conductor.
In order to ensure the safety of the operators and the reliable
operation of the equipment, the power supply at the construction site
must be equipped with a regulated power supply and a leakage protector.
The welding machine must be operated under the correct control of the
operator, otherwise it may cause combustion or explosion due to
high temperature.
It is strictly forbidden to use the welding machine in water or muddy
ground, avoid soaking, rain or damp.
LESITE
